Type A and B - Bolt-In Screen Panels

Dur-X-Vulcan(R) Rubber Bolt-In Screen panels are generally used on top decks for coarse screening applications. They are available in traditional bolt-in designs, as well as with hooked edges that can replace wire cloth without expensive screen box modifications.

• Polymer screen material with a steel backing plate
• Steel backing plate around
  • A group of openings (plaquette)-—Type A
       Generally applies to openings less than 2 inches square
  • A single opening —Type B
       Generally applies to openings 2 inches square and
• Rubber is vulcanized to steel backing plate, Urethane is bonded to steel backing plate
• Come with counter bored bolt holes
• Tapered openings to eliminate plugging
  • Type A
    Screens have openings on straight row centers
  • Type B
    Screens can be straight row or staggered openings
• Choice of Polymer Screen Materials and tapered opening sizes
  • Most common material for this screen is Dur-X-Vulcan® Screen Material
  • Available in Dur-X-Kleen® Screen Material
  • Available in Dur-Elast® Screen Material
• Order in overall thicknesses in ¼ inch increments only

• Molded in Skid bars to keep oversize material off the screen surface and make openings available to smaller material.
• Solid impact areas to withstand heavy loads fed to the screen surface
      This is also offered as a separate replaceable impact pad

Contact your local Durex representative for help in selecting the Bolt-In Screen Media that's right for your application.